Build prop tweaks for Android

Build prop tweaks for Android

Warning:
This Tweaks may brick your Android device. Make sure that you take a complete backup of your ROM using a custom recovery. I am not responsible if you brick your device.

Introduction

As you know Android is open source and the development of Android is increased in today’s life. Basically, what happens is Android operating system is having some of the information and that is really important a lot. Now, whenever a user wants to do editing in this the Android system they do changes in build prop. Build prop tweaks are something which helps you to do changes in the system and customize your android.

Android is open source so what does the users and developers do is the just check for the system codes. Which will suit best in every Android smartphone? So today we are sharing the Build Prop Tweaks for your Android device. This tweak works on every Android device. It will work absolutely fine in Android versions such as jelly bean, KitKat, Lollipop and Marshmallow.

The thing is that if you are having any rooted Android device. So this tweak will work absolutely fine. Every user can do editing. But while editing you have to make sure that you do proper editing or else it will lead to brick your Android device. Then you have to Install custom ROM on your Android device. You can easily increase the bootup time of your Android. Increase sound and much more.

Let me tell you an example.
Suppose if you are using any of your Android devices. In your Android, there is no navigation bar. Now accidentally you drop your Android device. Now, at this situation your buttons are not working. With the help of build prop, you can add navigation bar on your screen easily on your Android device.

You have to make sure that you don’t brick your Android device. While doing any changes on your Android device. You have to play safe if you have to play with build prop.

If you will add up this code on your Android device. Then you have to restart your Android device. To make your device to run those code. This is really very simple and easy if you follow up this guide properly then you will be able to run those codes. So let’s get started how can you apply those codes on your Android device.


Best Build Prop Tweaks Codes
Below are the Build Prop Tweaks which will help you out to install best function on your devices such as fasten your booting speed increase your internet speed and much more.



1. Better RAM management

Code:

ro.HOME_APP_ADJ=1

2. Improves audio and video recording quality

Code:

ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65

3. Faster streaming videos

Code:

media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false

4. Video acceleration and HW debugging. debug.composition.type can also be changed to cpu or mdp.

Code:

debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing

5. Disables built in error reporting.

Code:

profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1

6. Better net speeds.

Code:

net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,8 7380,256960,4096,163 84,256960

7. Saves power. 

Code:

ro.mot.eri.losalert.delay=1000 (could brake tethering.)
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000

8. 3G tweaks.

Code:

ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6

9. Disables logcat

Code:

logcat.live=disable

10. Screen recognizes only two fingers.

Code:

ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2

11. Support for ipv4 and ipv6.

Code:

persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1

12. Phone rings immediately.

Code:

ro.telephony.call_ring.delay=0
ring.delay=0

13. Disables blackscreen issue after a call.

Code:

ro.lge.proximity.delay=25
mot.proximity.delay=25

14. Better scrolling.

Code:

windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000

15. Better signal.

Code:

persist.cust.tel.eons=1

16. Better call voice quality.

Code:

ro.ril.enable.amr.wideband=1

17. Better signal.

Code:

ro.config.hw_fast_dormancy=1

18. Faster boot.

Code:

ro.config.hw_quickpoweron=true

19. Disables error checking.

Code:

ro.kernel.android.checkjni=0
ro.kernel.checkjni=0

20. Dalvik Virtual Machine tweaks.

Code:

dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy

21. Disables locating. 
Also delete /system/app/networklocation.apk and /system/

Code:

framework/com.android.location.provider.jar

Code:

ro.com.google.locationfeatures=0
ro.com.google.networklocation=0

22. Disables sending of usage data.

Code:

ro.config.nocheckin=1

23. Better image quality, lower performance.

Code:

persist.sys.use_dithering=1

24. Disable notification while adb is active

Code:

persist.adb.notify=0

25. Change LCD density

Code:

ro.sf.lcd.density=xxx

Note: Replace "xxx" with numeric value.

26. MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds).

Code:

ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000

27. Key lights stay on while screen is on.

Code:

ro.mot.buttonlight.timeout=0

28. Disable strict mode checking.

Code:

persist.android.strictmode=0

29. Remove FPS cap. May be unstable – better have it activated

Code:

debug.gr.swapinterval=0

30. build.prop tweaks for battery life

Code:

wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0

31. build.prop tweaks for improved performance

Code:

debug.performance.tuning=1

How To Use Build Prop Tweaks On Your Android Device.If you don’t know how to install those codes on your Android device. Don’t worry. About how can you install those codes on your Android device? If you are having rooted Android device on your device. Then you are good to go.

1) Download and install root explorer on your Android device from above given requirements
2) Open the application and grant the root permissions
3) Now, simply open go to /System/ and then you will be able to see Build.Prop file
4) Now, click on the option called as Mount R/O.
5) Long press on that files and you will get a pop-up of open with
6) Just hit open with text editor and then you are good to go
7) Copy the above code of your choice and simply paste on your build.Prop
8) Click on the save changes and then reboot your Android device.